EMCO MAT FB-3
- Vertical milling head with swiveling unit
- Safety hand wheels in X and Y axis
- Control panel with clearly arranged keyboard
- Covered spindle and carriage clamping
- Gray cast iron machine stand
- Swivel-mounted digital display
- Clamping area: 600 x 200 mm
- Max. table load: 50 kg
- Max. speed: 2200 rpm
- Drive power milling spindle: 1.4 kW
EMCOMAT FB-450 MC
- Swivel-mounted control panel
- Reversible main spindle
- Covers eliminate the risk of injuries
- Shafts and gears hardened and ground
- Linear guides
- Main motor with spindle brake
- Milling spindle supported radially and axially in four bearings
- Sinumerik 828D or Heidenhain TNC 620
- Clamping area: 800 x 400 mm
- Max. table load: 300 kg
- Max. speed: 5000 rpm
- Power milling spindle: 10 kW
EMCOMAT FB-600 MC
- Swivel-mounted control panel
- Reversible main spindle
- Covers eliminate the risk of injuries
- Shafts and gears hardened and ground
- Linear guides
- Main motor with spindle brake
- Milling spindle supported radially and axially in four bearings
- Sinumerik 828D or Heidenhain TNC 620
- Clamping area: 800 x 400 mm
- Max. table load: 300 kg
- Max. speed: 5000 rpm
- Power milling spindle: 13 kW
EMCOMAT-14 D
- Main spindle DIN55029 Tailstock (can be set off-center)
- Single tool holder (clamping claw)
- Belt drive for feed gear
- Electric chuck guard with limit switch
- Optional equipment: e.g. coolant device, slideable chip protection doors etc.
- Distance above centers: 140 mm
- Distance between centers: 650 mm
- Spindle bore: Ø 40 mm
- Max. speed : 4000 rpm
- Max. drive performance : 7.5 kW
EMCOMAT-17 D
- Main spindle DIN55029 Tailstock (can be set off-center)
- Single tool holder (clamping claw)
- Belt drive for feed gear
- Electric chuck guard with limit switch
- Optional equipment: e.g. coolant device, slideable chip protection doors etc.
- Distance above centers: 170 mm
- Distance between centers: 700 mm
- Spindle bore: Ø 50 mm
- Max. speed (17S): 2350 rpm
- Max. speed (17D): 3000 rpm
- Max. drive performance (17S): 3.2 kW
- Max. drive performance (17D): 5.3 kW
EMCOMAT-20 D
- Main spindle DIN55029
- Tailstock (can be set off-center)
- Single tool holder (Clamping claw)
- Belt drive for feed gear
- Electric chuck guard with limit switch
- Optional equipment: e.g. coolant device, slideable chip protection doors etc.
- Distance above centers: 200 mm
- Distance between centers: 1000 mm
- Spindle bore: Ø 50 mm
- Max. speed: 3000 rpm
- Max. drive performance: 5.3 kW