Unimat ML Design

Unimat ML Design & Technology  Secondary – High  school Level

 

Unimat ML Design & Technology was developed this solution for more ability stronger than Unimat 1, such as Slides, tailstock and intermediate pieces are composed of metal, manufactured and treated for cutting-edge CNCmachines for perfect alignment. This guarantees a high level of precision despite the modularity of all machines. The UNIMAT MetalLine excels in model making, suitable for secondary school or higher until technical education, as well as in industrial use with includes all parts in full-metal construction to build one out of these machines :
woodturning lathes , jig saw , sanding machine, woodturning machine variations, handheld drill/sanding

         

@@The CoolTool slide show .PDF

@@The CoolTool slide show .MP4

@@The CoolTool slide show .PPT

 

Jig Saw Machine

The powerful jigsaw can be used with plywood, solid wood (up to 7 mm), balsa wood (20 mm), plastics and thin metal sheets. No annoying opening and clamping of the jigsaw blade when cutting windows and notches.

  • Motor 20,000 rpm ,12V,
  • Headstock M12x1.8 mm hole through spindle ,
  • Reduction 6:1 (3.333 rpm) ,
  • Tailstock  M12x1.15 mm sleeve travel ,
  • Adaptor 110-240V/50Hz 12V DC ,2A

 

 

 

 

Woodturning Machine

The smallest lathe in the world creates elaborate pieces of turned wood. The small 12 V power package achieves an outstanding result with a distance between centers of 135 mm (up to 324 mm extendable) and up to 50 mm diameter, while still being childproof.
Chandeliers, scale masts, gun barrels, doll house furniture … all easily done.

 

 

 

 

 

Sanding Machine

The stationary rotating sanding disc provides the final touch to your work pieces and can sharpen your tools: scissors to carving knives, chisels, gouges, etc. It can also be used as a hand-sander for hard-to-reach places.

 

 

 

 

 

Small woodturning Machine

Variation Small Woodturning Machine:
Tiny sticks of wood or soft metal up to a diameter of 6mm can be clamped with collets allowing for precise, miniature workings.Variation Faceplate Turning:
The work piece is clamped on only one side using the faceplate. You can now hollow out the wood using the turning gouge, e. g. for an eggcup.

 

 

 

Handheld Drill/Sander

      

Handheld Drill: For drilling and milling bits with shank diameters 1 – 6 mm.

Handheld Sander: With a 50 mm sanding disk also suitable for places hard to reach.

Unimat ML Design & Technology Lab Class